My typical VirtualBox network configuration is: eth0 (NAT), eth1 (Host Only), eth2(Internal)
runcluvfy.sh stage -pre crsinst -n rac01,rac02 -r 11gR2 -fixup -fixupdir /tmp – FAILED
Node connectivity passed for subnet "10.0.2.0" with node(s) rac02,rac01 ERROR: PRVF-7617 : Node connectivity between "rac01 : 10.0.2.15" and "rac02 : 10.0.2.15" failed TCP connectivity check failed for subnet "10.0.2.0" Node connectivity passed for subnet "192.168.56.0" with node(s) rac02,rac01 TCP connectivity check passed for subnet "192.168.56.0" Node connectivity passed for subnet "10.0.0.0" with node(s) rac02,rac01 TCP connectivity check passed for subnet "10.0.0.0" Pre-check for cluster services setup was unsuccessful. Checks did not pass for the following node(s): rac01 [grid@rac01:/media/sf_Linux/11.2.0.4/grid] $
I understand the error is ignorable but why create an ignorable error in the first place?
Next, I would like to look at the bottom line to know if the check passed for failed and if the failure is false positive, then it would require wasted time for investigation.
A better alternative is to exclude eth0 from the check using -networks eth1,eth2 to have successful setup.
Pre-check for cluster services setup was successful.
runcluvfy.sh stage -pre crsinst -n rac01,rac02 -r 11gR2 -fixup -fixupdir /tmp -networks eth1,eth2 -verbose
[grid@rac01:/media/sf_Linux/11.2.0.4/grid] $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 08:00:27:02:B1:57 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe02:b157/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:578823 errors:0 dropped:0 overruns:0 frame:0 TX packets:292879 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:477712790 (455.5 MiB) TX bytes:15902513 (15.1 MiB) [grid@rac01:/media/sf_Linux/11.2.0.4/grid] $ ./runcluvfy.sh stage -pre crsinst -n rac01,rac02 -r 11gR2 -fixup -fixupdir /tmp -networks eth1,eth2 -verbose Performing pre-checks for cluster services setup Checking node reachability... Check: Node reachability from node "rac01" Destination Node Reachable? ------------------------------------ ------------------------ rac02 yes rac01 yes Result: Node reachability check passed from node "rac01" Checking user equivalence... Check: User equivalence for user "grid" Node Name Status ------------------------------------ ------------------------ rac02 passed rac01 passed Result: User equivalence check passed for user "grid" Checking node connectivity... Checking hosts config file... Node Name Status ------------------------------------ ------------------------ rac02 passed rac01 passed Verification of the hosts config file successful Interface information for node "rac02" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.0.2.15 10.0.2.0 0.0.0.0 10.0.2.2 08:00:27:87:91:11 1500 eth1 192.168.56.12 192.168.56.0 0.0.0.0 10.0.2.2 08:00:27:4A:7B:27 1500 eth2 10.10.10.12 10.0.0.0 0.0.0.0 10.0.2.2 08:00:27:E8:D6:21 1500 Interface information for node "rac01" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.0.2.15 10.0.2.0 0.0.0.0 10.0.2.2 08:00:27:02:B1:57 1500 eth1 192.168.56.11 192.168.56.0 0.0.0.0 10.0.2.2 08:00:27:BD:66:A4 1500 eth2 10.10.10.11 10.0.0.0 0.0.0.0 10.0.2.2 08:00:27:60:79:0F 1500 Check: Node connectivity for interface "eth1" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac02[192.168.56.12] rac01[192.168.56.11] yes Result: Node connectivity passed for interface "eth1" Check: TCP connectivity of subnet "192.168.56.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac01:192.168.56.11 rac02:192.168.56.12 passed Result: TCP connectivity check passed for subnet "192.168.56.0" Check: Node connectivity for interface "eth2" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac02[10.10.10.12] rac01[10.10.10.11] yes Result: Node connectivity passed for interface "eth2" Check: TCP connectivity of subnet "10.0.0.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac01:10.10.10.11 rac02:10.10.10.12 passed Result: TCP connectivity check passed for subnet "10.0.0.0" Checking subnet mask consistency... Subnet mask consistency check passed for subnet "192.168.56.0". Subnet mask consistency check passed for subnet "10.0.0.0". Subnet mask consistency check passed. Result: Node connectivity check passed Checking multicast communication... Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0" passed. Checking subnet "10.0.0.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "10.0.0.0" for multicast communication with multicast group "230.0.1.0" passed. Check of multicast communication passed. Checking ASMLib configuration. Node Name Status ------------------------------------ ------------------------ rac02 passed rac01 passed Result: Check for ASMLib configuration passed. Check: Total memory Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 3.8674GB (4055296.0KB) 1.5GB (1572864.0KB) passed rac01 3.8674GB (4055296.0KB) 1.5GB (1572864.0KB) passed Result: Total memory check passed Check: Available memory Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 3.5583GB (3731180.0KB) 50MB (51200.0KB) passed rac01 3.269GB (3427772.0KB) 50MB (51200.0KB) passed Result: Available memory check passed Check: Swap space Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 8GB (8388604.0KB) 3.8674GB (4055296.0KB) passed rac01 8GB (8388604.0KB) 3.8674GB (4055296.0KB) passed Result: Swap space check passed Check: Free disk space for "rac02:/tmp" Path Node Name Mount point Available Required Status ---------------- ------------ ------------ ------------ ------------ ------------ /tmp rac02 / 52.2988GB 1GB passed Result: Free disk space check passed for "rac02:/tmp" Check: Free disk space for "rac01:/tmp" Path Node Name Mount point Available Required Status ---------------- ------------ ------------ ------------ ------------ ------------ /tmp rac01 / 49.9507GB 1GB passed Result: Free disk space check passed for "rac01:/tmp" Check: User existence for "grid" Node Name Status Comment ------------ ------------------------ ------------------------ rac02 passed exists(54322) rac01 passed exists(54322) Checking for multiple users with UID value 54322 Result: Check for multiple users with UID value 54322 passed Result: User existence check passed for "grid" Check: Group existence for "oinstall" Node Name Status Comment ------------ ------------------------ ------------------------ rac02 passed exists rac01 passed exists Result: Group existence check passed for "oinstall" Check: Group existence for "dba" Node Name Status Comment ------------ ------------------------ ------------------------ rac02 passed exists rac01 passed exists Result: Group existence check passed for "dba" Check: Membership of user "grid" in group "oinstall" [as Primary] Node Name User Exists Group Exists User in Group Primary Status ---------------- ------------ ------------ ------------ ------------ ------------ rac02 yes yes yes yes passed rac01 yes yes yes yes passed Result: Membership check for user "grid" in group "oinstall" [as Primary] passed Check: Membership of user "grid" in group "dba" Node Name User Exists Group Exists User in Group Status ---------------- ------------ ------------ ------------ ---------------- rac02 yes yes yes passed rac01 yes yes yes passed Result: Membership check for user "grid" in group "dba" passed Check: Run level Node Name run level Required Status ------------ ------------------------ ------------------------ ---------- rac02 5 3,5 passed rac01 5 3,5 passed Result: Run level check passed Check: Hard limits for "maximum open file descriptors" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac02 hard 65536 65536 passed rac01 hard 65536 65536 passed Result: Hard limits check passed for "maximum open file descriptors" Check: Soft limits for "maximum open file descriptors" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac02 soft 1024 1024 passed rac01 soft 1024 1024 passed Result: Soft limits check passed for "maximum open file descriptors" Check: Hard limits for "maximum user processes" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac02 hard 16384 16384 passed rac01 hard 16384 16384 passed Result: Hard limits check passed for "maximum user processes" Check: Soft limits for "maximum user processes" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac02 soft 16384 2047 passed rac01 soft 16384 2047 passed Result: Soft limits check passed for "maximum user processes" Check: System architecture Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 x86_64 x86_64 passed rac01 x86_64 x86_64 passed Result: System architecture check passed Check: Kernel version Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 2.6.39-400.17.1.el6uek.x86_64 2.6.32 passed rac01 2.6.39-400.17.1.el6uek.x86_64 2.6.32 passed Result: Kernel version check passed Check: Kernel parameter for "semmsl" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 250 250 250 passed rac01 250 250 250 passed Result: Kernel parameter check passed for "semmsl" Check: Kernel parameter for "semmns" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 32000 32000 32000 passed rac01 32000 32000 32000 passed Result: Kernel parameter check passed for "semmns" Check: Kernel parameter for "semopm" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 100 100 100 passed rac01 100 100 100 passed Result: Kernel parameter check passed for "semopm" Check: Kernel parameter for "semmni" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 128 128 128 passed rac01 128 128 128 passed Result: Kernel parameter check passed for "semmni" Check: Kernel parameter for "shmmax" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 4398046511104 4398046511104 2076311552 passed rac01 4398046511104 4398046511104 2076311552 passed Result: Kernel parameter check passed for "shmmax" Check: Kernel parameter for "shmmni" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 4096 4096 4096 passed rac01 4096 4096 4096 passed Result: Kernel parameter check passed for "shmmni" Check: Kernel parameter for "shmall" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 4294967296 4294967296 2097152 passed rac01 4294967296 4294967296 2097152 passed Result: Kernel parameter check passed for "shmall" Check: Kernel parameter for "file-max" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 6815744 6815744 6815744 passed rac01 6815744 6815744 6815744 passed Result: Kernel parameter check passed for "file-max" Check: Kernel parameter for "ip_local_port_range" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 between 9000.0 & 65500.0 between 9000.0 & 65500.0 between 9000.0 & 65500.0 passed rac01 between 9000.0 & 65500.0 between 9000.0 & 65500.0 between 9000.0 & 65500.0 passed Result: Kernel parameter check passed for "ip_local_port_range" Check: Kernel parameter for "rmem_default" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 262144 262144 262144 passed rac01 262144 262144 262144 passed Result: Kernel parameter check passed for "rmem_default" Check: Kernel parameter for "rmem_max" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 4194304 4194304 4194304 passed rac01 4194304 4194304 4194304 passed Result: Kernel parameter check passed for "rmem_max" Check: Kernel parameter for "wmem_default" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 262144 262144 262144 passed rac01 262144 262144 262144 passed Result: Kernel parameter check passed for "wmem_default" Check: Kernel parameter for "wmem_max" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 1048576 1048576 1048576 passed rac01 1048576 1048576 1048576 passed Result: Kernel parameter check passed for "wmem_max" Check: Kernel parameter for "aio-max-nr" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac02 1048576 1048576 1048576 passed rac01 1048576 1048576 1048576 passed Result: Kernel parameter check passed for "aio-max-nr" Check: Package existence for "binutils" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 binutils-2.20.51.0.2-5.36.el6 binutils-2.20.51.0.2 passed rac01 binutils-2.20.51.0.2-5.36.el6 binutils-2.20.51.0.2 passed Result: Package existence check passed for "binutils" Check: Package existence for "compat-libcap1" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 compat-libcap1-1.10-1 compat-libcap1-1.10 passed rac01 compat-libcap1-1.10-1 compat-libcap1-1.10 passed Result: Package existence check passed for "compat-libcap1" Check: Package existence for "compat-libstdc++-33(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed rac01 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed Result: Package existence check passed for "compat-libstdc++-33(x86_64)" Check: Package existence for "libgcc(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed rac01 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed Result: Package existence check passed for "libgcc(x86_64)" Check: Package existence for "libstdc++(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed rac01 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed Result: Package existence check passed for "libstdc++(x86_64)" Check: Package existence for "libstdc++-devel(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed rac01 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed Result: Package existence check passed for "libstdc++-devel(x86_64)" Check: Package existence for "sysstat" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed rac01 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed Result: Package existence check passed for "sysstat" Check: Package existence for "gcc" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 gcc-4.4.7-11.el6 gcc-4.4.4 passed rac01 gcc-4.4.7-11.el6 gcc-4.4.4 passed Result: Package existence check passed for "gcc" Check: Package existence for "gcc-c++" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed rac01 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed Result: Package existence check passed for "gcc-c++" Check: Package existence for "ksh" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 ksh-20120801-21.el6.1 ksh-20100621 passed rac01 ksh-20120801-21.el6.1 ksh-20100621 passed Result: Package existence check passed for "ksh" Check: Package existence for "make" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 make-3.81-20.el6 make-3.81 passed rac01 make-3.81-20.el6 make-3.81 passed Result: Package existence check passed for "make" Check: Package existence for "glibc(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed rac01 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed Result: Package existence check passed for "glibc(x86_64)" Check: Package existence for "glibc-devel(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed rac01 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed Result: Package existence check passed for "glibc-devel(x86_64)" Check: Package existence for "libaio(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed rac01 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed Result: Package existence check passed for "libaio(x86_64)" Check: Package existence for "libaio-devel(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac02 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed rac01 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed Result: Package existence check passed for "libaio-devel(x86_64)" Checking for multiple users with UID value 0 Result: Check for multiple users with UID value 0 passed Check: Current group ID Result: Current group ID check passed Starting check for consistency of primary group of root user Node Name Status ------------------------------------ ------------------------ rac02 passed rac01 passed Check for consistency of root user's primary group passed Starting Clock synchronization checks using Network Time Protocol(NTP)... NTP Configuration file check started... Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes No NTP Daemons or Services were found to be running Result: Clock synchronization check using Network Time Protocol(NTP) passed Checking Core file name pattern consistency... Core file name pattern consistency check passed. Checking to make sure user "grid" is not in "root" group Node Name Status Comment ------------ ------------------------ ------------------------ rac02 passed does not exist rac01 passed does not exist Result: User "grid" is not part of "root" group. Check passed Check default user file creation mask Node Name Available Required Comment ------------ ------------------------ ------------------------ ---------- rac02 0022 0022 passed rac01 0022 0022 passed Result: Default user file creation mask check passed Checking consistency of file "/etc/resolv.conf" across nodes Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined File "/etc/resolv.conf" does not have both domain and search entries defined Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes... domain entry in file "/etc/resolv.conf" is consistent across nodes Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes... search entry in file "/etc/resolv.conf" is consistent across nodes Checking file "/etc/resolv.conf" to make sure that only one search entry is defined All nodes have one search entry defined in file "/etc/resolv.conf" Checking all nodes to make sure that search entry is "localdomain" as found on node "rac02" All nodes of the cluster have same value for 'search' Checking DNS response time for an unreachable node Node Name Status ------------------------------------ ------------------------ rac02 passed rac01 passed The DNS response time for an unreachable node is within acceptable limit on all nodes File "/etc/resolv.conf" is consistent across nodes Check: Time zone consistency Result: Time zone consistency check passed Starting check for Reverse path filter setting ... Reverse path filter setting is correct for all private interconnect network interfaces on node "rac02.localdomain". Reverse path filter setting is correct for all private interconnect network interfaces on node "rac01.localdomain". Check for Reverse path filter setting passed Pre-check for cluster services setup was successful. [grid@rac01:/media/sf_Linux/11.2.0.4/grid] $
Leave a comment